Waxed Parquet Block Floor is Sticky and Picks Up Dirt

Hello and Welcome to another Woodfloor-Renovations Blog Post.


Today I'll show you a couple of pictures from a recent Floor Sanding job of ours and explain a few things that many end users often do and wonder why what they have done looks rubbish and doesn't last.


Our client had previously done the floor sanding and sealing works herself, with poor results, and was asking many questions with regards to sanding/finishing/products etc.etc.


When she had last sanded/sealed the floor, [only 12 months ago] which is an original Pine Parquet Wood block floor, fitted in the diagonal herringbone pattern with no border approximately 90 years old, the area was, to cut a long story short, basically sanded and waxed, which had unquestionably been applied too thickly by our client, [a common DIY mistake] which was the reason the floor looked blotchy, felt sticky all the time, was difficult/impossible to clean and attracted dirt like bee's to a honeypot...[picture below] 

This picture [above] was taken about 30 minutes or so after we started sanding the floor, and you can clearly see the high traffic area's in the middle of the picture which were basically bare wood as the old seal had completely worn through.

The picture below is the floor in its finished condition, immediately after the 3rd coat of lacquer had been applied to this floor.

 Our client had specified a high traffic lacquered finish for this project, and in this case we applied 1 x coat of a solvent based primer to seal in any wax residues and negate any contamination of the new lacquered finish, this was then followed by 2 coats of Lobadur WS 2K Fusion which is a high performance 2 part lacquer, famed for its durability, which looked superb and will serve our client well for many a long day.

Looks a bit different from the first picture doesn't it !

Thanks for reading...Regards Gary

Floor Lacquer Systems...What are they?

Hello and welcome to another Woodfloor-Renovations Blog Post


Today I'd like to talk about about a subject that is oft ignored, even by many pro's, today's offering is:
 'Floor Lacquer Systems... What are they ??'


A floor lacquer system is the correct application of the proper primer coat and subsequent coats of either lacquer or oil.


Now dependant on some of the many variables involved with the floor sanding and sealing process, such as floor species, desired finish [sheen level] site conditions, time-frame, etc. etc. [the list is long] certain primers are more suitable than others for certain timbers and certain finishes.


For example, if the end user has properly prepared a Beech strip floor and wants a deep rich natural colourization of the timber, then an Oil based primer may be the ideal primer to use, but using this primer may not be practical if the job needs to be completed in a day as oil based primers have much longer drying times [6-8hrs in some cases]


Now if the same floor HAS to be done in a day then you can use a solvent based primer such as Junckers Baseprime, or Blanchon Fond Du, these types of primers almost give the same kind of depth of colour to the timber but dry in about an hour, so very often, a capable professional can apply 1 x coat of primer and 2 x coats of lacquer in around 3-4 hrs in reasonable site drying conditions.


So you have now applied your primer coat, the wood floor looks great, now's the time to apply the lacquer to finish off the system, for examples sake again lets say this project is a domestic situation and the space is a busy living area belonging to a busy family. If this imaginary project was for one of my clients I would have recommended 1 x Primer Coat followed by 2 x High Traffic Lacquer, or maybe even 3 x High Traffic Lacquer.


With wood floor lacquer systems its about horses for courses, some situations demand a harder wearing finish which will cost a bit more initially, but will be more cost effective in the longer term as it will just wear better than a more standard lacquer finish.


Conversely the clients may have a low traffic environment and not need the high traffic finish, in which case a mid range product such as Bona Mega or Junckers Strong would be eminently suitable. 


In reality its up to the end user to decide whether a 3 coat or 4 coat system best suits their particular needs, if you are in any doubt ask your floor sanding professional.


Hope that helps - Thanks for reading