Saturday, 2 July 2011

Floor Lacquer Sheen Levels....Whats the Difference ??

Hello and welcome to another WFR Blogpost.


Today I'll enlighten you on a question that confuses most of my clients who just don't understand the difference....


The direct question I was asked is:-"What's the difference between Bona Mega Matt & Bona Mega Silk Matt ?? "


The trade terminology for this is "Sheen Level" ie. the difference between Matt & Silk Matt products. What this basically means in how much light the product reflects when applied to your wooden floor, typically a Matt product will reflect around 20% of the sunlight that hits it, Silk Matt or Satin reflect between 40-60% depending on the manufacturer, and Gloss reflects about 80%.


Ultra Matt is a finish which is becoming more and more popular these days and just about all the top manufacturers have these products in their ranges, Ultra Matt Lacquers have a very low sheen level which by comparison to Matt/Silk Matt/Gloss, this would be around the 9% mark.


At the end of the day choosing which sheen level to go for is a subjective issue and needs to be made by the home-owner before the project starts, what I will say is around 80% of my clients choose Silk Matt/Semi Gloss [which are the same] most of them say they don't want the finish to be too shiny or too flat/dull, so they plump for the Silk Matt which ALWAYS looks good by the way....All the finishes look good but its all about personal preference....


If you are not sure, ask your contractor to sand off a small area of your floor for you prior to the project starting and apply a quick couple of coats of the lacquer, so you can see for yourself how the sheen level will look on your particular floor, a good contractor won't mind doing this for you as it doesn't take long to do......


Hope that helps.....Thanks for reading. 

No comments:

Post a Comment

If you have any questions or comments kindly leave them here....